Aromatherapy Jewelry

Posts Tagged ‘in-line fish tank water heaters’

Aquarium water heaters come in different shapes, sizes, and types. They are used to regulate water temperature in the fish tank, to prevent fluctuating temperature changes that often result in fish stress and poor growth. Some aquarium water heaters are more preferable than other types. Your choice would depend on your fish tank needs and aquarium setup. Hence, it is necessary to do a little research before deciding on the best water heater to suit your aquarium. The following are some of the most common aquarium water heaters being used today.

There are different kinds of aquarium water heaters that you could use, depending on your fish tank needs. The least expensive one is the hang-on water heater that is attached to one side of the aquarium. Although this can be so easy to set up and usually comes with most aquarium kits, the hang-on heater is known for its uneven heat distribution. It is quite possible that the water near the heater would be hotter than than water from the farther area.

Some devices are hanged on one side of the tank, outside the water. This aquarium heater type is the most common. It is even included in some aquarium kits, making it less expensive than other aquarium water heaters. However, heat distribution from this device can be uneven. Chances are, water located near the heater would be hotter than the water that’s farther from the heat source. Also, placing hiding places near the heater is not advised. This is because the fish will likely be burned if they stay too close to the water heater.

The filter is also a very important aquarium accessory. Some of these filter types, usually the canister filter, already come equipped with a water heater. Basically, the device heats up the water as it passes through the device. The water is also filtered by the machine.

The quality of water heater you buy will play a big part in the health of your fish. Hence, a number of factors must be carefully considered before making a choice. One of the factors is obviously the size of the tank. Make sure that the heating ability of the device is suitable for the fish tank.

The breed of the fish themselves also come into play. Some types of fish are capable of living within room temperature. However, others are much more comfortable within hotter or colder surroundings. This is why you must research about the normal habitat requirements of your fish and use this to determine your general wattage selection for the water heater.

You also have the option of buying more decorations if you want to hide the heater. However, make sure that enough hiding places are provided for the fish, otherwise, they might make the spot near the heater their favorite hiding place. If this happens, your fish could run the risk of being burned when too close to the heat source. Check the thermostat and monitor your aquarium’s heat level frequently.

Also, you will find that most people are opting to hide their heaters. You can do this by placing an eye-catching decoration or plant to cover the device. Just make sure that you put up many hiding places within the tank. Otherwise, the fish might only use the one near the heater, causing them fatal burns. Frequently monitor your thermostat to make sure that your fish are still swimming within tolerable temperature levels.

Our author is a member and keynote speaker at many aquarium clubs, and has a few very large tanks of his own. To get further details about in-line aquarium water heaters and titanium fish tank water heaters, please go to marinedepot.com.